EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre S2110

Fuji Xerox DocuCentre S2110 User Manual

Fuji Xerox DocuCentre S2110
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
Image Quality Problems
171
Problem Solving
11
Image Quality Problems
If the image quality of the printout is poor, use the table below to find our most likely
cause, and take the required action.
If the image quality remains poor after taking the required action, contact our Customer
Support Center.
Symptom Possible Cause Remedy
Copies are dirty. Is the document glass or the
document cover dirty?
Clean the document glass or the document
cover.
Reference
z
Refer to "Cleaning the Document Cover and the
Document Glass" (P.161).
Is the document a
transparent type such as a
transparency medium?
When copying highly translucent documents,
dirt on the document cover shows up in the
copy. Place a sheet of white paper over the
document before copying.
Is the document on colored or
rough paper, or a blueprint?
Adjust the copy density or remove the
background paper color before copying.
Reference
z
Refer to "Lighten/Darken" (P.96).
Is the document on glossy
printing paper?
Glossy printing paper easily sticks to the
document glass, and shadows can resemble
dirt in the copy. Place a transparency or
transparent film under the document before
copying.
Black lines appear
in copies.
Is the document feeder's
constant velocity transport
glass dirty?
Clean the constant velocity transport glass.
Reference
z
Refer to "Cleaning the Document Presser and the
Constant Velocity Transport Glass" (P.162).
Copies are too
dark.
Is the copy density set to a
high value?
Adjust the copy density.
Reference
z
Refer to "Lighten/Darken" (P.96).
Copies are too
light.
Is the document light?
Is the copy density set to a
low value?
The copy is
slightly out of
position.
Is the paper loaded in the
correct position such as the
paper's leading edge drifted
away from the corners of the
tray?
Load paper correctly, and align the paper
guides to the paper.
Reference
z
Refer to "Loading Paper in Trays 1 and 2 (Optional)"
(P.72).
z
Refer to "Loading Paper in Bypass Tray" (P.74).
Copies are out of
position or
crooked.
Have you placed the
document correctly?
Place the document correctly.
Reference
z
Refer to "Placing Document" (P.84).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre S2110 and is the answer not in the manual?

Fuji Xerox DocuCentre S2110 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre S2110
CategoryAll in One Printer
LanguageEnglish

Related product manuals