Fuji Xerox DocuCentre S2110

Power Saver Mode
49
Product Overview
3
Exiting Power Saver Mode
The following describes how to deactivate Power Saver mode.
The machine exits Power Saver mode and the <Power Saver> button light is turned off in
the following instances:
 Exiting Low Power mode
z
Receiving a job
z
Entering System Administration mode from a computer
z
Pressing any button on the control panel
z
Taking paper out or putting in a tray
z
Opening or closing any cover of the machine
 Exiting Sleep mode
z
Receiving a job
z
Entering System Administration mode from a computer
z
Pressing the <Power Saver> button
z
Pressing any button on the control panel
*
* : This feature is available only when the Return from Sleep Mode by Any Key feature is enabled.
Reference
z
For more information, refer to "System Settings" (P.125).