Environment Settings
20
Environment Settings
2
Interface Cables
When connecting the machine directly to a computer, use a USB interface. When
connecting the machine to a network, use an Ethernet interface.
Using the USB Interface
The machine supports the USB 2.0 interface.
z
You can use a cable up to 5 m in length according to the USB 2.0 standard.
To connect the USB interface:
1 Press the power switch to the [ ] position to turn the power OFF.
z
Check that the display of the status machine diagram is turned off.
2 Connect a USB cable to the USB 2.0 interface connector.
3 Connect the other end of the USB cable to the computer.
To Next Page
Loading...
Need help?
General
