Product Overview
46
Product Overview
3
Power Source
Switching the Power On
The following describes how to switch the power on.
The machine takes approximately 19 seconds or less to warm up and to be ready to copy or
print after the power is turned on. It may take slightly longer than normal depending on the
device configuration.
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
1 Press the power switch to the [ | ] position to switch the power on.
z
While the machine is warming up, the status machine diagram displays as shown in the image. The machine
is not accessible while it's warming up.
z
Make sure that the power cable is connected to the machine and the wall outlet properly.
To Next Page
Loading...
Need help?
General
