Product Overview
50
Product Overview
3
Control Panel
The names and functions of the control panel's components are described below.
No. Component Description
1 <2 Sided> button Press this button to select 1 Sided or 2 Sided copying.
Normally, the icon is off (1 J 1 Sided). The selection moves
to the right from off (1 J 1 Sided) J [1 J 2 Sided] J [2 J
2 Sided] J [2 J 1 Sided] every time that the button is
pressed. As you press the button when the [2 J 2 Sided] is
selected, the indicator light is turned off again.
z
For more information, refer to "2 Sided" (P.91).
2 <ID Card Copy> button Press this button to use the ID Card Copy feature.
While the ID Card Copy feature is selected, the button is lit.
z
For more information, refer to "ID Card Copy" (P.98).
3 <Original Size> button Press this button to specify the scanning size and
orientation for using the document glass.
When the document is placed on the document feeder, the
scanning size is set automatically.
The scanning size changes on the status machine diagram
every time that the button is pressed.
z
For more information, refer to "Original Size" (P.102).
Press this button to switch the copy mode while the ID Card
Copy feature is selected.
4 Numeric keypad Press these numeric buttons to enter numbers, such as the
total number of copies.
5 <Log In / Out> button Press and hold this button for more than 4 seconds to enter
the System Administrator mode.
Press this button to exit the System Administration mode.
The <Log In/Out> button is lit in the System Administration
Mode.
z
For more information, refer to "Enter System Administration Mode"
(P.122).
23456
7
8
9
101112
13141516171819
20
21
1
22
23
To Next Page
Loading...
Need help?
General
