Activating the Communication Port To Use
25
Environment Settings
2
Activating the Communication Port To Use
Use CentreWare Internet Services to activate the communication port you want to use.
You can activate the following ports:
z
You can change any settings on CentreWare Internet Services, when the machine is in standby status or
Power Saver mode and has no running job.
z
For information on how to make settings from CentreWare Internet Services, refer to "Setting Items on CentreWare Internet
Services" (P.29).
To activate a communication port:
1 Start CentreWare Internet Services.
z
For more information, refer to "Starting CentreWare Internet Services" (P.28).
2 Click the [Properties] tab.
3 From the menu on the left, select [Connectivity].
Port Description
SNMP Activate this port to use the SNMP protocol (used for operations
such as loading the machine's information to the print driver).
LPD Activate this port to print when using LPD.
Port9100 Activate this port to print when using Port9100.
Network TWAIN Activate this port to scan using a PC-based application
To Next Page
Loading...
Need help?
General
