Paper Jams
207
Problem Solving
11
E-5: Paper Jams in Bypass Tray
Follow the steps below to clear a paper jam in the Bypass tray.
1 Inspect the inside (around the paper feed entrance) of the Bypass tray, and remove the
jammed paper.
z
If multiple sheets of paper were loaded, remove all the paper while you clear the jam.
z
If the paper tears, check to make sure there are no remaining shreds in the machine.
2 If multiple sheets of paper were loaded, align the corners of the removed paper.
3 Insert the paper with the side to print on facing down, aligning it so that its leading edge
lightly contacts the paper feed entrance.
4 Remove the jammed paper by referring to "E-1: Paper Jam in Left Cover [A]" (P.202).
To Next Page
Loading...
