Notes and Restrictions
221
Appendix
12
Notes and Restrictions on the Use of the Copy Feature
Copy Feature
The machine does not offer the Improves Fit function.
ID Card Copy
z
While the ID Card Copy feature is enabled, you cannot select the automatic paper
selection.
z
When the original document is larger than the standard printable size, the output image
is not printed in the center of a sheet and the edges of the scanned image may be lost.
z
When the multiple mode is selected, the scanned images which overflow the first page
are laid out and printed on the second page or later.
z
The machine may not detect the document size correctly, when the original document is
under the following conditions:
- The original document is white and thin.
- The original document is placed at an excessive angle.
- The original document is placed out of the scanning area.
About Memory
If the machine’s memory capacity becomes insufficient when copying using the collated
feature, it outputs only the document data which is being scanned.
Notes and Restrictions on the Use of the Print Feature
z
You cannot operate the Scan and Print features simultaneously.
If you start a print job while a scan job is running, the scan job may fail.
Output of Long Feed Documents
The output of long feed documents is not supported.
Print Jobs while the Control Panel is being Operated
The processing print job or output speed may be reduced in the following cases:
z
When the control panel is operated during print job execution
When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified.
z
A 2 sided print job is printed on one side.
z
A job was terminated (If data cannot be written to the print page buffer, the job
including that page is terminated).
Job Counter Counts for 2 Sided Printing
When printing a 2 sided print job, depending on the application being used, blank sheets
can be inserted automatically to adjust pages. These blank sheets inserted by the
application also are counted by the meter.
To Next Page
Loading...
Need help?
General
