Using CentreWare Internet Services
29
Environment Settings
2
z
When specifying a port number, add ":" and the port number after the IP address or the Internet address.
z
The IPv6 address cannot be entered manually in some cases depending on the web browser that you use.
z
HTTPS is not supported.
Setting Items on CentreWare Internet Services
The table below lists the menu items on the CentreWare Internet Services screens.
z
You must have a user name and a passcode to change the settings. The user ID "11111" and the passcode "x-
admin" is set as default. For information on how to change the user ID and the passcode, refer to "Using
CentreWare Internet Services" (P.27) and "System Administrator Settings (Security)" (P.37).
z
You cannot enter the system administration mode from a computer while the machine control panel is being
used or the machine side is in the system administration mode, or there are any current or pending jobs. Also,
you cannot operate the machine control panel while entering the system administration mode from a
computer.
z
Double-byte characters cannot be used in CentreWare Internet Services.
Tab Menu Item See Page:
Properties (P.30)
Description (P.30)
General Setup -
Usage Counters (P.30)
Power Saver Settings (P.30)
Connectivity -
Port Settings (P.30)
Physical Connections -
Ethernet (P.31)
Protocols -
TCP/IP (P.31)
SNMP Configuration (P.32)
LPD (P.33)
Port9100 (P.34)
HTTP (P.34)
Network TWAIN (P.35)
Security -
IP Filtering (P.35)
System Administrator Settings (P.37)
Support (P.38)
Support (P.38)
To Next Page
Loading...
Need help?
General
