Advanced Copy Settings
91
Copy
5
Advanced Copy Settings
This section describes all the settings you can set for the copy feature.
* : For the features with "*", you can change the settings in the System Administration mode.
z
You can change the default value of some setting items.
z
For more information on changing the settings, refer to "System Administrator Program List" (P.125).
2 Sided
You can set to scan a 1 Sided or 2 Sided or copy on one or both sides of paper.
1 Press the <2 Sided> button to select the desired copy method.
1J1 Sided
Copies 1 Sided document on one side of paper, same appearance as the documents.
Setting Item Description See
Page:
2 Sided Used to select 1 Sided or 2 Sided copying. (P.91)
Pages per Side Used to copy multiple documents on a single
page.
(P.93)
Collated Sets the output method to use when making
multiple sets of copies.
(P.94)
Original Type Sets the document type. (P.95)
Lighten/Darken Adjusts the copy density. (P.96)
ID Card Copy Used to copy ID cards. (P.98)
Reduce/Enlarge Sets a reduction or enlargement factor. (P.97)
Original Size Sets the document size. (P.102)
Paper Supply Sets the tray to use. (P.103)
Sharpness* Adjusts the sharpness. (P.104)
Background Suppression* Removes the document's background
suppression.
(P.104)
Edge Erase* Adjusts the level of edge erase. (P.104)
Auto Rotation Rotates the scanned data when copying. (P.104)
To Next Page
Loading...
Need help?
General
