Scan
108
Scan
6
Scanning Procedure
The basic flow of scan operations including placing document in the machine and making
advanced settings is described below.
Placing the Document
The following two methods are available to load documents:
Document feeder
z
Single sheet
z
Multiple sheets
Document glass
z
Single sheet
z
Bound documents, such as books
z
Precautions for scanning from a computer
When you are away from the machine to operate a computer with the documents left on the machine, other
users may operate the machine and there is a risk of document loss and information leakage. Use a computer
which is as close to the machine as possible. When the scan process is complete, check that you have all pages
of the documents.
Document Feeder
Supported document sizes
You can place the standard size document in the document feeder.
When document is placed in the document feeder, the machine detects the document size
automatically. The following standard size documents are detected automatically: A5 ,
A5 , A4 , A4 , A3 , B5 , B5 , B4 , 8.5 x 11" , 8.5 x 11" , 8.5 x 13" *, 8.5 x
14" *, 11 x 17" , 16K *, and 8K *.
z
The document sizes with an asterisk can be automatically detected depending on the settings. You can select
one of the following alternative document sizes. For more information, refer to "System Settings" (P.125).
z
8.5 x 13" or 8.5 x 14"
z
China (8K/16K) or Taiwan (8K/16K)
Selectable document sizes in the scan driver
A5 , A4 , A4 , A3 , B5 , B4 , 5.5 x 8.5" ,7.25 x 10.5" , 8.5 x 11" , 8.5 x 11" ,
8.5 x 13" , 8.5 x 13.4" , 8.5 x 14" , 11 x 17" , 16K
*
, and 8K
*
.
* : China (8K/16K) and Taiwan(8K/16K)
z
TWAIN driver supports the document sizes described above.
The supported document size by Windows Image Acquisition (WIA) driver depends on the running
application.
To Next Page
Loading...
Need help?
General
