Using CentreWare Internet Services
37
Environment Settings
2
[Apply] button
You can apply changes by pressing this button.
z
Reboot the machine to enable new settings.
System Administrator Settings (Security)
You can set the system administrator's user ID and the passcode.
System Administrator Settings
Administrator's Login ID
You can enter the system administrator's user ID (between 1 and 32 ASCII code characters
in length, excludes "+", ";", "<", ">", """, "?", "[", "]", "'", "{", "}", "|", ":". (Default: 11111)
Administrator's Passcode
You can set the system administrator's passcode (between 4 and 12 ASCII code characters
or blank). (Default: x-admin)
Retype Administrator's Passcode
You need to re-enter the system administrator’s passcode.
Maximum Login Attempts
When login attempts using the system administrator’s user ID fail repeatedly, access is
denied when the number of failed attempts reaches the number set here.
Specify a number between 0 and 10. Specify 0 to disable this setting.
The total number of failed authentication attempts is reset when authentication is
successful or the system is restarted. (Default: 5)
[Apply] button
You can apply changes by pressing this button.
To Next Page
Loading...
Need help?
General
