Using CentreWare Internet Services
35
Environment Settings
2
Configuration
Connection
[Enabled] is displayed.
Physical Connection
[Ethernet] is displayed.
Keep Alive Timeout
The keep-alive timeout period is displayed.
Port Number
You can set the port No. used for HTTP communication (a value between 1 and 65535).
You must set a unique number for each port. (Default: 80)
Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
Title
You can select the display for the title displayed on a browser from [Internet Services] or
[Printer Model - IP Address].
(Default: Internet Services)
[Apply] button
You can apply changes by pressing this button.
z
Reboot the machine to enable new settings.
Network TWAIN
You can set the Network TWAIN protocol.
General
Network TWAIN Port Status
You can check [Enabled] to use Network TWAIN. (Default: On)
Physical Connection
[Ethernet] is displayed.
Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
[Apply] button
You can apply changes by pressing this button.
z
Reboot the machine to enable new settings.
IP Filtering (Security)
You can restrict the supported IP addresses.
IPv4 Filtering
IP Filtering
You can check [Enabled] to enable IP Filtering. (Default: Off)
To Next Page
Loading...
Need help?
General
