EasyManua.ls Logo

Fuji Xerox DocuCentre S2110

Fuji Xerox DocuCentre S2110
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printer Problems
181
Problem Solving
11
The image at the
edges of the
paper is missing.
The document exceeds the
machine's printable area.
Enlarge the machine's print area, or reduce
the document's print area.
The settings
specified in the
printing options
are disabled.
The print driver of another
model machine is in use.
Install the machine's print driver.
An option has not been
mounted.
Check the options mounted in the machine,
and then reselect the items in [Items] under
[Options] in the print driver.
The computer is
not using the print
driver supplied
with the machine
(is using another
company's print
driver).
Confirm whether the print
driver on the computer is the
one supplied with the
machine.
On the computer, select the print driver
supplied with the machine. If the print driver
is not listed for selection, install the print
driver and then select it. Operation is not
guaranteed if another company's print driver
is used.
Symptom Possible Cause Remedy

Table of Contents

Related product manuals