Changing Paper Size
77
Loading Paper
4
4 While pinching the levers of the two paper guides, move them to the edges of paper.
5 Load paper with the side to copy or print on facing up. Align the leading edge of paper with
the left side of the tray.
z
Do not load paper above the maximum fill line. It may cause paper jams or machine malfunctions.
6 Push the tray in gently until it stops.
z
When pushing the tray in, do it slowly. If the tray is pushed with too much force, it may cause machine
malfunctions.
z
Affix the paper size label to the front of the tray.
7 Set the paper size setting.
z
Refer to "Setting the Paper Size" (P.78).
To Next Page
Loading...
