Setting the Paper Size
79
Loading Paper
4
3 Press the <Size (Press 2sec)> button to select the size and orientation of the paper loaded in
the selected tray.
The selected paper size and orientation are displayed in the status machine diagram.
The <Start> button lights up blinking during the settings.
4 Press the <Start> button to confirm the settings.
To exit paper size setting mode without saving the settings, press the <Clear All> button or
the <Stop> button.
z
Be sure to press the <Start> button. Otherwise the settings of paper size and orientation are canceled and
remain the previous settings.
To Next Page
Loading...
