¢ Accessories
Part name Exterior Q’ty Part name Exterior Q’ty
Installation manual 1 Adapter cable
1*
1
External power supply
unit
1 Cable clamp
1*
1
Tapping screw 4 Cable tie (large) 3
Connecting cable (5 m) 1 Cable tie (small) 1
EMI core
1*
2
NOTES:
• *1: It is used to connect to the following indoor unit type.
– Circular flow cassette type
– 3D flow cassette type
– Compact floor type and Compact floor (EEV external) type
• *2: It is used to connect to the following indoor unit type.
– Floor/Ceiling type
¢ Installation precautions
This product can be installed in the following direction.
Prohibited
To prevent water from entering through the cable,
do not install this product in the direction shown in the following figure.
8-6. External power supply unit (UTZ-GXXA) - (10-58) - 8. Optional parts installation
OPTIONAL
PARTS
OPTIONAL
PARTS
To Next Page
Loading...
