3-2. Network converter (UTY-VTGXV)
• With this Network converter, single split type and multi system air condition-
ers can be controlled by System controller, Touch panel controller, Central
remote controller in VRF network system or by Wired remote controller con-
nected to the Network converter.
• Start/Stop, operation mode, temperature setting, fan speed, etc. can be
done with these controllers.
• One Network converter can be connected and controlled up to 16 indoor
units.
• Two Wired remote controllers are possible for one Network converter by
UTY-VTGXV.
• Up to 100 Network converters can be connected in one VRF network sys-
tem. (One Network converter is regarded as one refrigerant system. Total
refrigerant systems in one VRF network system must be within 100.)
¢ Accessory
Name and shape Q’ty Application
Cable tie
7
For mounting the remote controller cable and
transmission cable
Screw (M4 × 16 mm)
4 For mounting the Network converter
Installation manual
1
3-2. Network converter (UTY-VTGXV)
- (05-120) - 3. Adaptor/Convertor units
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
