Fujitsu AJ 126LELDH Series - Function Settings

2. Function settings
To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE:
Incorrect settings can cause a product malfunction.
RELATED LINKS
"Setting on outdoor unit PCB" on page 07-67
"Setting on indoor unit PCB" on page 07-74
"Setting by service tool (UTY-ASGXZ1)" on page 07-83
"Indoor unit (setting by wireless remote controller)" on page 07-87
"Indoor unit (setting by UTY-RNK)" on page 07-93
"Indoor unit (setting by UTY-RSR, UTY-RHR)" on page 07-96
"Indoor unit (setting by UTY-RSK, UTY-RHK)" on page 07-99
"Indoor unit (setting by UTY-RNRZ)" on page 07-102
"Indoor unit (setting by UTY-RLR)" on page 07-105
"Function details" on page 07-108
"Wired remote controller (UTY-RNK)" on page 07-112
"Simple remote controller (UTY-RSK, UTY-RHK)" on page 07-114
"Group remote controller" on page 07-116
"Touch panel controller" on page 07-118
"Central remote controller (UTY-DCGZ)" on page 07-119
"Wired remote controller (Touch panel)" on page 07-121
"Wired remote controller (UTY-RLR)" on page 07-125
"Simple remote controller (UTY-RSR, UTY-RHR)" on page 07-127
"Network convertor (UTY-VTGX, UTY-VTGXV)" on page 07-129
"Network convertor (UTY-VGGXZ1)" on page 07-131
"Signal amplifier" on page 07-133
"KNX convertor for VRF" on page 07-135
"KNX convertor for Indoor unit" on page 07-137
"Modbus converter for VRF" on page 07-138
"Modbus converter for indoor unit" on page 07-141
"Network converter for LonWorks" on page 07-143
"Duct static pressure setting" on page 07-144
"Administrative indoor unit setting" on page 07-146
"Energy saving setting on System controller" on page 07-148
"Electricity charge apportionment setting (System controller, Touch panel controller)" on page 07-154
- (07-66) -
2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS