3. Adaptor/Convertor units
RELATED LINKS
"Adapter/Converter/Maintenance tool" in Chapter 1. GENERAL INFORMATION on page 01-12
3-1. Network converter (UTY-VTGX)
• With this Network converter, single split type and multi system
air conditioners can be controlled by System controller, Touch
panel controller, Central remote controller in VRF network sys-
tem or by Wired remote controller connected to the Network
converter.
• Start/Stop, operation mode, temperature setting, fan speed,
etc. can be done with these controllers.
• One Network converter can be connected and controlled up to
16 indoor units.
• One Wired remote controller is possible for one Network con-
verter by UTY-VTGX.
• Up to 100 Network converter can be connected in one VRF
network system. (One Network converter is regarded as one
refrigerant system. The total refrigerant system in one VRF
network system must be within 100.)
¢ Accessory
Name and shape Q’ty Application
Cable tie
4
For mounting the remote controller cable and
transmission cable
Screw (M4 × 16 mm)
3 For mounting the Network converter
Installation manual
1
3-1. Network converter (UTY-VTGX)
- (05-114) - 3. Adaptor/Convertor units
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
