2-13. Group remote controller
DIP switch
SW1 Memory backup setting
SW2 Prohibited
¢ Switch location
1
2
Front case (back side)
DIP switch
ON
OFF ON
¢ DIP switch 1 setting
• SW1: Memory backup setting
If there is a power failure when this setting is enabled, all the settings stored in the memory
will be saved.
SW1 Memory backup Factory setting
OFF Disable ♦
ON Enable
• SW2: Setting prohibited
SW2 Factory setting
OFF Fixed at OFF ♦
ON Setting prohibited
2-13. Group remote controller - (07-116) - 2. Function settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
