1. System settings
Set each switch to the corresponding system type as described in the accompanying explanation,
and do not use a nonexistent switch combination.
CAUTION
• Perform the system type setting and address setting, before turning on the power.
• For proper operation of the air conditioner, perform the setting as described in the instruction.
RELATED LINKS
"System type setting" on page 07-2
"Address setting" on page 07-4
"Manual address setting method" on page 07-9
"Address setting by remote controller" on page 07-16
"Automatic address setting" on page 07-55
"Terminal resistor setting" on page 07-63
"Indoor unit connection check" on page 07-64
- (07-1) -
1. System settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
