3-7. Modbus converter for VRF (UTY-VMGX)
The convertor for connecting VRF network system to the BMS system built by
Modbus open network, for manage small to medium sized BMS and VRF net-
work system.
¢ Accessory
Name and shape Q’ty Application
Cable tie
7
For mounting the power supply cable and transmission
cable
Screw (M4 × 16 mm)
4 For mounting the Modbus converter
DVD
1 For initial setting
Modbus connector
1
For connecting the cable and attaching the board
connector
USB cable
1 For initial setting tool
Installation manual
1
¢ Other required devices (Locally purchased)
• To install tool for convertor, personal computer that satisfies the following system requirements is
necessary.
Personal computer system requirement
Operating system
• Microsoft Windows 7 Home Premium (32-bit or 64-bit) SP1
• Microsoft Windows 7 Professional (32-bit or 64-bit) SP1
• Microsoft Windows 8.1 (32-bit or 64-bit)
• Microsoft Windows 8.1 Pro (32-bit or 64-bit)
• Microsoft Windows 10 Home (32-bit or 64-bit)
• Microsoft Windows 10 Pro (32-bit or 64-bit)
Supported languages: English, Chinese, French, German, Russian, Spanish, and
Polish
Memory 1 GB or more
Display 1,366 × 768 or higher resolution
Interface USB port (× 1)
Software Adobe Reader 11.0 or later
Optical drive DVD drive
3-7. Modbus converter for VRF (UTY-VMGX) - (05-153) - 3. Adaptor/Convertor units
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
