3-4. Network converter for LonWorks (UTY-VLGX)
• The convertor for connecting VRF network system to the BMS system built
by LonWorks open network, for manage small to medium sized BMS and
VRF network system.
• Maximum of 128 indoor units can be connected to one Network converter
for LonWorks.
• VRF system can be centrally controlled or monitored from BMS via UTY-
VLGX.
• Maximum 4 Network converter for LonWorks can be connected to 1 BMS.
¢ Accessory
Name and shape Q’ty Application
Cable tie
3
For mounting the power supply cable and transmission
cable
Screw (M4 × 20 mm)
4 For mounting the Network converter
Dust proof bushing
1 For connecting the power supply cable
CD-ROM
1
Includes the software and manuals of tools for Network
converter
Connector cable
1 For initial setting tool
Installation manual
1
¢ Other required devices (Locally purchased)
• To install tool for convertor, personal computer that satisfies the following system requirements is
necessary.
Personal computer system requirement
Operating system
• Microsoft Windows 7 Professional (32-bit) SP1
• Microsoft Windows 8.1 Pro (32-bit)
• Microsoft Windows 10 Home (32-bit or 64-bit)
• Microsoft Windows 10 Pro (32-bit or 64-bit)
Supported Language: English and Chinese
Memory 1 GB or more
Display 1,024 × 768 or higher resolution, 16-bit or higher color
Interface RS232C serial port × 1 (Use “COM1” port)
Software Adobe Reader 9.0 or later
Optical drive CD-ROM drive
3-4. Network converter for LonWorks (UTY-VLGX) - (05-131) - 3. Adaptor/Convertor units
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
