3-6. KNX converter for indoor unit (UTY-VKSX)
The convertor for connecting indoor unit to the central/home controller installed
in KNX open network in order to manage the indoor unit from KNX network.
¢ Accessory
Name and shape Q’ty Application
Cable tie
4 For mounting transmission cable
Screw (M4 × 16 mm)
3 For mounting this product
Connector cable
1 For connecting to indoor unit (1.5 m)
Installation manual
1
3-6. KNX converter for indoor unit (UTY-VKSX)
- (05-147) - 3. Adaptor/Convertor units
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
