Fujitsu AJ 126LELDH Series - Central Remote Controller (UTY-DCGZ)

2-15. Central remote controller (UTY-DCGZ)
¢ DIP switch setting
DIP switch Memory backup setting
 Switch location
Front case (back side)
Set the DIP switch to ON
 Memory backup setting
DIP switch Factory setting
OFF Disabled ♦
ON Enabled
¢ Address setting
1. Tap Menu button.
2. Tap “Installer Setting”.
3. Tap “Central controller Address Setting”.
2-15. Central remote controller (UTY-DCG
Z)
- (07-119) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS