EasyManua.ls Logo

Fujitsu AJ 126LELDH Series - Page 202

Fujitsu AJ 126LELDH Series
1092 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model name ARXC060GTEH ARXC072GTEH ARXC090GTEH ARXC096GTEH
Power supply 230 V ~ 50 Hz
Available voltage range 198—264 V
Capacity
Cooling
kW 18.0 22.4 25.0 28.0
Btu/h 61,400 76,400 85,300 95,500
Heating
kW 20.0 25.0 28.0 31.5
Btu/h 68,200 85,300 95,500 107,500
Input power W 730 681 819 838
Static pressure range Pa 100 to 250 0 to 300
Standard static pressure Pa 100 150
Fan
Airflow rate
HIGH
m
3
/h (l/s)
3,500 (972) 3,900 (1,083) 4,300 (1,195) 4,850 (1,347)
MED 3,000 (833) 3,300 (917) 4,000 (1,111) 4,250 (1,181)
LOW 2,460 (683) 3,000 (833) 3,500 (972) 3,600 (1,000)
Type × Q'ty Sirocco × 2
Motor output W 540 700 × 2
Sound pressure level*
HIGH
dB (A)
49 47 48 48
MED 45 43 46 45
LOW 42 40 44 42
Heat exchanger type
Dimensions (H × W × D)
mm
336 × 890 × 53.2 378 × 1,250 × 53.2 508 × 1,250 × 76.2
Length 890 1,250
Fin pitch 1.45 1.60
Rows × Stages 4 × 16 4 × 18 4 × 20
Face area
m
2
0.30 0.50 0.64
Pipe type (Material) Grooved H-pin (Copper)
Fin
Type (Material) Slit (Aluminum) Louver (Aluminum)
Surface treatment Hydrophilic coating
Air filter
Model name UTD-LF60KA
Net material PP honeycomb
Enclosure
Material Galvanized sheet iron
Color
Dimensions
(H × W × D)
Net
mm
400 × 1,050 × 500 450 × 1,587 × 700 550 × 1,587 × 700
Gross 460 × 1,230 × 640 520 × 1,750 × 825 620 × 1,750 × 825
Weight
Net
kg
46 84 105
Gross 51 100 125
Connection pipe diameter
Liquid
mm (in)
Ø 9.52 (Ø 3/8)
(Flare)
Ø 9.52 (Ø 3/8)
(Brazing)
Gas
Ø 19.05 (Ø 3/4)
(Flare)
Ø 22.22 (Ø 7/8)
(Brazing)
Drain hose
VP25
I.D.: Ø 25 (1); O.D.: Ø 32 (1-1/4)
NOTES:
Specifications are based on the following conditions:
Cooling: Indoor temperature of 27 °CDB/19 °CWB, and outdoor temperature of 35 °CDB/24 °CWB.
Heating: Indoor temperature of 20 °CDB/15 °CWB, and outdoor temperature of 7 °CDB/6 °CWB.
Pipe length: 7.5 m, Height difference: 0 m. (Between outdoor unit and indoor unit.)
Protective function might work when using it outside the operation range.
*: Sound pressure level:
Measured values in manufacturer’s anechoic chamber.
Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
2-10. High static pressure duct type
- (04-22) - 2. Specifications
INDOOR
UNITS
INDOOR
UNITS

Table of Contents

Related product manuals