2. Select the function number by pressing the SET TIME “<” button or SET TIME “>” button.
3. Select the setting number by pressing the SET TEMP. “ ” or the SET TEMP. “ ” button. The
setting number indication flashes during number selection setting.
Example) Function number: 30; Setting number: 01
Setting number
4. Confirm the setting by pressing the TIMER SET button. The data will be transferred to the in-
door unit.
• When the address data is properly set up on the indoor unit, the flashing of the number stops
and the set number will be displayed. (GOOD)
• When the address data is not set up correctly, “- -” is displayed. (ERROR) Back to the previ-
ous step and set up the indoor unit address data again.
RELATED LINKS
"Completion of setting mode" on page 07-31
"Function details" on page 07-108
2-5. Indoor unit (setting by UTY-RNK
)
- (07-94) - 2. Function settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
