Fujitsu AJ 126LELDH Series - Page 896

¢ Indoor unit function setting
1. In initial display of the setting mode, by pressing SET TEMP. “ ” button or SET TEMP. “ ”
button, select a remote controller address. (Select the indoor unit you want to operate.)
Initial display of
address setting mode
Example: When remote controller address
“01” is selected
Remote controller address
2. Press the FAN button. “Function number” indicator flashes.
Function number
3. Set up the function number by pressing SET TEMP. “ ” button or SET TEMP. “ ” button.
Function number
4. Press the FAN button. “Setting number” indicator flashes.
Setting number
5.
Set up the setting number by pressing SET TEMP. “ ” button or SET TEMP. “ ” button.
Setting number
Example) Function number: 30; Setting number: 01
2-7. Indoor unit (setting by UTY-RSK
, UTY-RHK)
- (07-100) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS