Fujitsu AJ 126LELDH Series - Page 938

• SET7-1, 7-2, 7-3: Setting prohibited
SET7-1, 2, 3 Factory setting
OFF Fixed at OFF ♦
ON Setting prohibited
• SET7-4: Terminal resistance setting
Terminal resistance of Modbus communication can be set. (Terminal resistance: 120 Ω)
In case of circuit terminal resistance, set the terminal resistance to be enabled.
SET7-4 Terminal resistance Factory setting
OFF Disable ♦
ON Enable
2-25. Modbus converter for indoor unit - (07-142) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS