Fujitsu AJ 126LELDH Series - Page 955

• Installation abstract
Electricity meter connection methods mentioned here can be adapted for the System controller
and Touch panel controller (TPC). However, the setting restrictions mentioned here must be ob-
served.
– Multiple VRF networks can be connected to 1 electricity meter. (with network crossover)
NOTE: Combination of UTY-ALGXZ1 and UTY-PLGXE2 does not multiple VRF networks.
VRF network system 1
VRF network system 2
VRF network system 3
VRF network system 1
VRF network system 2
VRF network system 3
Whm
Whm
Whm
Whm
– With the electricity charge apportionment function, an electricity meter system cannot span TPC.
Whm
Whm
Whm
Whm
TPC1 management range
TPC2 management range
TPC2
TPC1
Whm
Whm
Whm
TPC1 management range
TPC2 management range
TPC2
TPC1
Create an electricity meter system within
the range of the units managed by each
TPC.
An electricity meter system spanning units
managed by TPC cannot be created.
2-30. Electricity charge apportionment setting (System controller, Touch panel
controller)
- (07-159) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS