229
PRIMERGY RX300 S3 User's Guide
8
Configuring Hardware and Utilities
● Key Operations in the BIOS Setup Utility
The roles of the keys used for BIOS Setup Utility settings are as follows:
■ How to Exit the BIOS Setup Utility
1 Use the [ ← ] [ → ] keys to display the Exit menu.
2 Use the [ ↑ ] [ ↓ ] keys to select the exit mode.
• To save configuration changes before exiting:
Move the cursor to [Save Changes & Exit] and press the [Enter] key.
The message "Save configuration changes and exit now?" is displayed.
• To exit without saving configuration changes:
Move the cursor to [Discard Changes & Exit] and press the [Enter] key.
The message "Configuration has not been saved! Save before exiting?" is displayed.
table: List of key operations on the BIOS Setup Utility Screen
Key Description
[F1] Switches the detailed information display on and off.
[Esc] When the submenu screen is displayed, the submenu closes and the screen returns
to the previous menu. When the menu screen is displayed, this utility closes.
[ ↑ ] [ ↓ ]
Scrolls through the menu option list.
[ ← ] [ → ]
Switches between menus.
[-] [+] Changes the value of an item.
[Enter]
Selects an item. For items where is displayed, a submenu appears.
[F9] Resets each item to the default value. (The default value may vary from the value
set at the time of purchase.)
[F7] Resets an item to its previous value.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Execute Command
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
To Next Page
Loading...
