Fujitsu Primergy RX300 S3 - Page 230

230
Chapter 8 Configuring Hardware and Utilities
3 Use the [← ] [→ ] keys to move the cursor to [Yes] or [No], and press the [Enter]
key.
• If you selected [Save Changes & Exit] from the Exit menu:
Select [Yes] to exit.
After saving the changed settings, the BIOS Setup Utility closes and the server restarts.
Select [No] not to exit.
The display returns to the BIOS Setup Utility window.
• If you selected [Discard Changes & Exit] from the Exit menu:
Select [Yes] to save changes before exit.
The BIOS Setup Utility closes and the server restarts.
Select [No] when not saving the settings.
The BIOS Setup Utility closes and the OS starts.