6-1
6. SETTINGS ON WEB INTERFACE
This chapter covers how to access Communication Unit settings, and connection in-
formation. User must login as Administrator to access these functions.
Note: Communication may not be possible if the settings are incorrect. Settings
should be performed by an experienced administrator. Also, be sure to log out after
changing any settings. See section 6.1.
6.1 Administrator Login
Do as follows to login as an administrator.
1. Click the administrator login/logout icon.
2. Input "Admin" in the [Username] field and "Fb1234567890" in the [Password] field.
The factory-set administrator password is "Fb1234567890". To change the pass-
word, see section 6.10. The user name cannot be changed.
Note: If you forgot the administrator password, contact your dealer.
3. Click the [Login] button.
[Log] and [Admin] appear in the menu bar. The color of the Login icon changes to
blue.
4. To logout after completing all settings, click the login icon.
[Log] and [Admin] disappear from the menu bar. The color of the icon changes to
white.
Note 1: The system automatically logs you out if there is no interaction in the Web in-
terface, or if the Communication Unit is restarted.
To Next Page
Loading...
