3. SETTINGS FOR IP HANDSET
3-11
3.6 Administrator Settings
This section covers how to access the advanced settings for the IP Handset. User
must login as Administrator to access these functions.
Note: Communication may not be possible if setting are wrong. Settings should be
performed by an experienced administrator. Also, be sure to log out after performing
the settings. You automatically log out if you exit the [Admin Settings] menu.
How to login the administrator settings
Do as follows to login as administrator.
1. At the main screen, press the Enter key to open the main menu.
2. Press W, S, X or T to select the [Admin] menu, then press the Enter key.
The following screen appears.
3. Press S to select the [Username] field, then press the Enter key.
4. Input “Admin” (without quotation marks), then press the Enter key.
For how to input the user name, see section 1.5.2.
5. Press S or T to select the [Password] field.
6. Input the password (default: Fb1234567890), then press the Enter key.
For how to input the password, see section 1.5.2.
7. Press T to select [OK], then press the Enter key.
The [Admin Settings] menu appears.
To Next Page
Loading...
