2. IP HANDSET OPERATIONS
2-12
2.2.3 How to edit a contact
You can edit a contact registered in the [Contacts] list.
1. At the main screen, press the key to open the [Contacts] list.
2. Press S or T to select a contact to edit.
3. Press the key to open the sub-menu.
4. Press S or T to select [Edit], then press the Enter key.
Press S or T to scroll through the screen.
5. Edit the name, phone number, and speed dial number (see section 2.2.1).
6. Press T to select [Save], then press the Enter key.
The message "Wait response..." and "Applied." appear, then the contact is saved
in the Communication Unit.
7. Press the key to go back to the main screen.
To Next Page
Loading...
