Furuno FELCOM501 - How to Set the Call Restrictions

3. SETTINGS FOR IP HANDSET
3-17
How to set the noise cancel
Turn the noise cancel on to reduce unwanted ambient sounds.
Do the following to turn echo cancel on or off:
1. In the [Admin Settings] menu, press S or T to select the [Phone] menu, then
press the Enter key.
2. Press T to select the [Noise Cancel] menu, then press the Enter key.
3. Press W or X to select [OFF] or [ON], then press the Enter key.
4. Press the key to go back to the main screen.
3.6.3 How to set the call restrictions
This section explains the following contents:
• How to permit/prohibit the outside line
• How to set the request of the caller code
• How to set the outside call filter
Note: Call restriction settings are saved inside the Communication Unit and can also
be accessed/changed from the Web interface (see section 6.2).
How to permit/prohibit the outside line
You can permit or prohibit the outside line.
1. In the [Admin Settings] menu, press S or T to select the [Restrictions] menu, then
press the Enter key.
The [Restrictions] menu appears.