Furuno FELCOM501 - Time Zone Settings; How to Use UTC Format

3. SETTINGS FOR IP HANDSET
3-4
3.3 Time Zone Settings
You can display the time and date in UTC format or as local time.
1. At the main screen, press the Enter key to display the main menu.
2. Press W, S, X or T to select the [Settings] menu, then press the Enter key.
3. Press S or T to select the [Time] menu, then press the Enter key.
The [Time] screen appears.
3.3.1 How to use UTC format
To use UTC format for the date and time, do the following:
1. In the [Time] screen, press S or T to select the [Time Offset] field.
2. Press W to select [OFF].
3. Press the Enter key to confirm the setting.
The [DST] screen appears.
4. Press W or X to select [OFF], then press the Enter key.
5. Press the Enter key to confirm the settings.
The message "Applied." appears.
6. Press the key to go back to the main screen.
Hour
Minute