Furuno FELCOM501 - Log Shows; How to Login as a Log User

5. WEB INTERFACE
5-26
5.11 Log Shows
You can display five logs: notification log, voice call log, data connection log, registra-
tion log, and remote access log. When the storage capacity of a log is reached, the
oldest entries are erased in order.
Note 1: The voice and data communication values shown on the terminal display and
within terminal logs are for indicative purposes only. These values should not be uti-
lized for billing or billing comparison purposes.
Note 2: The latest 100 entries for any log are shown. To view all the entries of a log,
save the log to a CSV file. A log stores up to 1000 entries.
An event log can be forwarded to a PC that has the syslog application installed (see
section 6.11).
5.11.1 How to login as a log user
To login as a log user, use the following procedure.
1. Click the [Login] icon.
The following pop-up menu appears.
2. Input "Log" in the [Username] box and "Lg1234567890" in the [Password] box.
"Lg1234567890" is the default password. To change the password, see x.x.x.
3. Click the [Login] button.
The [Log] menu appears in the menu bar.
4. To log out, click the [Login] icon.
The [Log] menu disappears from the menu bar.
Note 1: You can also logout automatically by closing your Web browser.
Note 2: This login procedure is abbreviated in the following sections.
Log Capacity for entries No. of entries displayable
Notification 1000 for each log 100 entries for each log
Voice Call
Data Connection
Registration
Remote Access