Furuno FELCOM501 - How to Use a Message in the Outbox

5. WEB INTERFACE
5-20
5.6.5 How to use a message in the outbox
You can edit and resend an already sent message from the outbox.
1. Click [SMS] in the menu bar.
2. Click [Outbox] in the sub menu to show the [Outbox] menu.
3. Click the sent date and time to select the message to edit and resend.
Detailed information about the message appears.
See the following table for operation information:
Operation Procedure
Edit the message and send
to a recipient.
1) Click the [Copy & edit] button.
The [Create New Message] menu opens with the orig-
inal recipient message in the [Message] field.
2) Edit the phone number in the [To] field, or click [Con-
tacts] to change the recipient.
3) Put a [9] in the box at the left side of [Delivery notifi-
cation], if necessary.
4) Click the [Encode] box, then select [GSM] or [Uni-
code].
5) Edit the message in the [Message] field.
6) Click the [Send] button to send the message.
7) Click the [Close] button.
Total message countTotal message countTotal message count
Date on which the
message was sent.
Recipient’s phone number.
If the recipient is recorded
as a contact, the recipient’s
name also appears here.
Message status.