7. MAINTENANCE AND TROUBLESHOOTING
7-11
7.5.2 Communication Unit and Antenna Unit test
The Communication Unit and Antenna Unit can be tested with the Web interface. Con-
duct this test when you feel there is a problem with the system, such as being unable
to send/receive data.
1. Open the Web interface.
2. Click [Help service].
3. Click [Diagnostics Test] to show the [Diagnostics Test] menu.
4. Click the [Start] button to start the diagnostics test.
The test takes approximately five minutes to complete.
Note: Do not navigate to another screen in the Web interface, or reset the power
during the diagnostics test.
To Next Page
Loading...
