Furuno FELCOM501 - How to Change the Ring Tone; Display Settings

3. SETTINGS FOR IP HANDSET
3-2
3.1.2 How to change the ring tone
You can set the ring tone for external/internal incoming call, and notification.
1. In the [Sounds] menu, press T to select the [Ring Tome] menu, then press the
Enter key.
The [Ring Tone] screen appears.
2. Press S or T to select the [External], [Internal], or [Notification] field.
3. Press W or X to select the ring tone (No.1 to 4).
Press the key to play the ring tone at the selected field. Press the key
to stop.
4. Press the Enter key to confirm the settings.
The message "Applied." appears.
5. Press the key to go back to the main screen.
3.2 Display Settings
You can change the font size, LCD backlight, and key backlight.
1. At the main screen, press the Enter key to display the main menu.
2. Press W, S, X or T to select the [Settings] menu, then press the Enter key.
3. Press S or T to select the [Display] menu, then press the Enter key.
The [Display] menu appears.