6. SETTINGS ON WEB INTERFACE
6-51
6.16 Login Banner Settings
The login banner message can be set to appear before the login screen in the IP
Handset and Web interface. This feature is handy for sharing important information
with crew, etc. as the message appears before they can login.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin] in the menu bar.
3. Click [Login Banner Settings] to show the [Login Banner Settings] menu.
4. Put a [9] in the box on the left side of [Enabled] (click the box to add [9]) to activate
this function.
To deactivate this function, uncheck the [9] in the box (click the box to delete [9]).
5. Write a message in the [Banner] field.
This menu appears in gray when the [Enable/Disable] menu is deactivated.
6. Click the [Apply] button.
The message "Applied." appears.
7. Click the [Close] button to close the message.
To Next Page
Loading...
