Furuno FELCOM501 - How to Transfer the Event Log to a PC

6. SETTINGS ON WEB INTERFACE
6-46
6.11 How to Transfer the Event Log to a PC
You can transfer the Event Log to a PC with the Syslog application installed.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin] in the menu bar.
3. Click [Analysis Tool].
4. Click [Syslog Transfer] to show the [Syslog Transfer] menu.
5. Put a [9] in the box on the left side of [Enabled] (click the box to add [9]) to activate
this function.
To deactivate this function, uncheck the [9] in the box (click the box to delete [9]).
6. Input the IP address of the PC in the [Transfer address] field.
7. Select priority of the events you want to transfer from the [Priority] field.
8. Click the [Apply] button.
The message "Applied." appears.
9. Click the [Close] button to close the message.