3. SETTINGS FOR IP HANDSET
3-20
3.6.4 How to transfer the syslog to a PC
You can transfer the syslog to a PC installing the syslog application.
1. In the [Admin Settings] menu, press T to select the [Syslog Transfer] menu, then
press the Enter key.
2. Press W or X to select [OFF] or [ON], then press the Enter key.
For [OFF], go back to the [Admin Settings] menu. For [ON], go to step 3.
3. Press W or X to select [Warning], [Notice], or [Info].
• [Warning]: Syslog entries with a level of "Warning" or higher are transferred.
• [Notice]: Syslog entries with a level of "Notice" or higher are transferred.
• [Info]: Syslog entries with a level of "Info" or higher are transferred.
4. Press the Enter key to display the [Syslog IP] screen.
5. Press W or X to select a cell to input the IP address.
6. Press the 0 to 9 key to input a part of the IP address of the PC in the cell.
7. Repeat steps 5 and 6 to input the IP address in the cells.
8. Press the Enter key to confirm the setting.
The message "Applied." appears.
9. Press the key to go back to the main screen.
To Next Page
Loading...
