2. IP HANDSET OPERATIONS
2-14
2.3 [History] Screen
Up to 20 calls can be stored in the IP Handset. When the 21st call occurs, the oldest
logged call is deleted from the list.
To access the [History] screen, press the key followed by X.
2.3.1 How to add a contact from the [History] screen
1. At the main screen, press the key.
2. Press X to open the [History] screen.
3. Press S or T to select a history to add.
4. Press the key to open the sub-menu.
5. Press S or T to select [Add Contact], then press the En-
ter key.
Note: This menu appears in gray and is unavailable in the
following cases:
• The memory capacity is reached (200 contacts).
• A "No caller ID" number’s history is selected.
6. Press S to select the [Name] field, then press the Enter
key.
7. Input a name of a party, then press the Enter key.
You can use a maximum of 20 characters. For how to input the name, see
paragraph 1.5.2.
8. Press S or T to select the [Speed Dial] field, then press the Enter key.
9. Input a speed dial number* if required, then press the Enter key.
Short dial numbers can range from 10 to 200.
For how to input the number, see paragraph 1.5.2.
*: Once registered, speed dial numbers allow you to dial a number using an ab-
breviated number. This feature is handy when assigned to regularly used num-
bers.
10. Press T to select [Add], then press the Enter key.
When the contact is saved in the [Contacts] list, the message "Wait response...",
followed by "Applied." appears.
11. Press the key to go back to the main screen.
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄
㻚㻚㻚
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
: Received
Date and time of call
Status icons
: Called
: Missed*
*: Calls received from an external number and which are not
answered from any handset are considered “missed” calls.
: Communication
failed
: Communication
successful
Number. If the
number is registered
in the contacts list,
the name also
appears here.
To Next Page
Loading...
