2. IP HANDSET OPERATIONS
2-11
6. Press T to select [Search], press the Enter key to perform the search.
The results of the search appear on the [Search Results] screen. If the contact
cannot be found, the message "Not found." appears.
Note: If the search is performed with nothing input in the field at step 5, all the con-
tacts appears in alphanumeric order.
7. Do one of the following depending on your objective:
• Place a phone call:
a) Press S or T to select a contact to call.
b) Press the key to open the [Call] screen.
c) Press the Enter key or the key.
• Edit contact:
a) Press S or T to select a contact to edit.
b) Press the Enter key to open the [Details] screen.
c) Press the key.
Start from step 5 at section 2.2.3.
• Delete contact:
a) Press S or T to select a contact to delete.
b) Press the key to delete the contact.
c) Press S to select [OK], press the Enter key.
To cancel the deletion, press T to select [Cancel], then press the Enter key.