6. SETTINGS ON WEB INTERFACE
6-11
6. Select a guidance language: Shows "English" or "Japanese".
7. Set a timeout time between 10 seconds to 99 seconds.
8. Click the [Apply] button to activate the internal call routing.
The message "Applied." appears.
9. Click the [Close] button to close the message.
When a voice call is received, the FELCOM251/501 plays guidance to the calling par-
ty. Then, the calling party inputs an extension number. The call is then transferred to
that number.
X Operation at calling side in the automatic transfer function
1) Call this vessel (AMBE+2).
You are requested to dial extension number.
2) Dial extension number (4 digits).
The extension number is called.
3) When the party answers, pick up the receiver.
4) Hang up the receiver after completing the call.
To Next Page
Loading...
