2. CHART PLOTTER
2-38
3. Tap the fleet target to check or edit.
4. To edit a fleet target, follow the appropriate procedure below.
Edit a nickname
1) Tap the letter to change in a nickname.
2) Use the software keyboard to edit the nickname.
3) Repeat steps 1) and 2) to continued editing. A nickname can have a maximum
of 32 characters.
4) Tap [×] to finish.
Change the color of a fleet target symbol
1) Tap [Color].
2) Select a color than tap [<] to go back one layer.
3) Repeat steps 1) and 2) to continued editing. A nickname can have a maximum
of 32 characters.
4) Tap [×] on the title bar to close the editing window.
2.17.6 How to put a fleet target at the center of the chart plotter screen
Tap the fleet target that you want to put at the center of the screen. Tap [Find on Chart]
to put the target at the center of the screen.
2.17.7 How to share user objects
When you receive a user object from a fleet target, the message "Fleet: user Object
received from..." appears.
Note: You can receive a maximum of 92 user objects. See section 9.3 for details.
To Next Page
Loading...
