9-1
9. FILE OPERATIONS
Points, tracks, routes and settings can be read and written, using the USB port, SD
card unit or card slot on the PSD-003 Switch Box (TZT2BB only). Further, with a My
Time Zero
™
* account, you can save settings data to the cloud. The card slot at the
back of the TZTL12F/TZTL15F is exclusively for use with chart cards.
* Only boundary line data can be imported. Boundary lines can be created with
TIMEZERO Marine Software.
The table below outlines the media that can be used with your unit.
Note: For care and handling of microSD and SD cards see section 1.11.
Handling USB flash memory
• Format the USB flash memory or SD card to file system FAT32. The capacity of the
media should be 32GB or less.
• Do not use a secure USB flash memory or SD card.
• Turn off the power before inserting or removing the media connected to the USB
port, to prevent corruption of data.
9.1 File Format
You can select the file format to use to export data.
1. Open the home screen, then tap [Settings]→[Files].
2. Tap [Export File Format].
Action
MicroSD
SD card
(TZT2BB
only)
USB port
SD Card Unit
(TZTL12F/TZTL15F,
option)
SD card
converter
adapter
Write data Yes Yes Yes Yes
Read data Yes Yes Yes Yes
To Next Page
Loading...
